Resistance furnace with controlled atmosphere EPV-1400
Industrial hydrogen high-temperature furnace EPV-1400 PV1.00.00 is used in various thermal processes (annealing, sintering, etc.) at temperatures up to 1400 °С and small gas emissions where there is no interaction between the residual gases and components of the hydrogen furnace in the atmosphere of moist formirgas (mixture of nitrogen and hydrogen) and pure hydrogen.
Industrial hydrogen high-temperature electric furnaces EPV-1400 are designed to be used in the premises meeting the requirements of the “Interindustry labor safety rules for heat treatment of metals” POT PM RM-005-97.
Specifications of hydrogen electric furnace EPV-1400
EPV-1400 |
|
Installed capacity, kW |
20 |
Maximum temperature in the working area, °С |
1400 |
Uniformity of temperature in the working area of the furnace at maximum temperature, °С |
10 |
Stability of the set temperature control by the automatic heating control system , % |
1 |
Furnace working area dimensions, L x W x H, mm |
400 x 200 x 200 |
Charge weight, not more than, kg |
20 |
Ultimate positive pressure in the heating chamber of the furnace, Pa (mm h) |
392...588 (40...60) |
Gas system of the furnace provides exit and measurement of nitrogen and hydrogen consumption, l / h |
Up to 400 |
The gas system moistens working gases at the specified temperature and supplies them in the necessary ratio to the furnace |
27...32 °С |
Temperature of the external surfaces of the furnace, not more than |
45 °С |
Rated voltage of the supply mains, V |
380/220 |
Nominal current frequency, Hz |
50 |
Number of phases of the furnace heater |
1 |
Furnace cooling water consumption, m3/hour |
1,5 |
Furnace dimensions, L x W x H, mm - furnace - control panel - transformer |
1800 x 1500 x 1850 645 x 590 x 1605 255 x 580 x 470 |
Weight, kg - furnace - control panel - transformer |
300 120 324 |
Nominal service life, years |
5 |
Water consumption for vacuum furnace cooling corresponds to the temperature difference at the input and output of the cooling circuits 20 °С.
Charge weight of the vacuum furnace depends on charge density. Charge weight is smaller for small density charges.
Our company LLC Prizma can design and manufacture industrial hydrogen electric furnaces to your specifications. Please let us know the furnace parameters you require: temperature, working atmosphere, working area dimensions, charge weight etc., and the furnace will be specially designed according to your requirements.