Oxygen purification units UOGK-10 and UOGK-60
Oxygen purification units UOGK-10 and UOGK-60 are used to purify oxygen from hydrogen, water vapors and dust impurities. Raw gas for the unit is technical or medical oxygen according to GOST 5583-78.
The oxygen purification unit is cooled by supplied drinking water according to GOST 15150-69 with flow rate 0.2 m3/hour and temperature 288 ± 10 °K. Water and condensate drain line should be connected to the water drain system with nominal diameter not less than Dn=15 mm. Zeolite regeneration in the purification oxygen unit requires supply of gaseous oxygen GOST 5583-78 with flow rate not less than 0.6 m3/hour and pressure 0.06-0.13 MPa.
Operation of the oxygen purification unit is based on the principle of catalytic sorption (palladium catalyst and NaX zeolite).
Specifications of oxygen purification units UOGK-10 and UOGK-60
UOGK-10 |
UOGK-60 |
|
Operating pressure, MPa (kgs/sm2) |
0,2-0,6 (2-6) |
0,2-0,8 (2-8) |
Capacity, m3/hour |
10 |
60 |
Hydrogen content in the raw gas, vol.%. |
1,0*10-3 |
1,0*10-3 |
Water vapors content in the raw gas, vol.%. (dew-point) |
2,55*10-4 (-70 °C) |
2,55*10-4 (-70 °C) |
Content of dust particles 0.5 microns and larger in the raw hydrogen, particles/l |
5 |
5 |
Power consumption, kW |
3,5 |
5,2 |
Dimensions, mm |
680 x 580 x 1850 |
780 x 750 x 2050 |
Weight, kg |
300 |
380 |
Our company Prizma LLC can develop and manufacture oxygen purification units to your specifications. Please let us know the parameters (chemical analysis) of your raw gas and what pressure, capacity and gas-purity value you want to receive at the output of your gas purification unit.